D-Link DGS-3130 Emulator - Page 611
Port Security Commands
![]() |
View all D-Link DGS-3130 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 611 highlights
DGS-3130 Layer 3 Stackable Managed Switch CLI Reference Guide 58. Port Security Commands 58-1 clear port-security This command is used to delete the auto-learned secured MAC addresses. clear port-security {all | {address MAC-ADDR | interface INTERFACE-ID [, | -]} [vlan VLAN-ID]} Parameters all address MAC-ADDR interface INTERFACE-ID , vlan VLAN-ID Specifies to delete all auto-learned secured entries. Specifies to delete the specified auto -learned secured entry based on the MAC address entered. Specifies to delete all auto-learned secured entries on the specified physical interface. (Optional) Specifies a series of interfaces or separates a range of interfaces from a previous range. No space is allowed before or after the comma. (Optional) Specifies a range of interfaces. No space is allowed before or after the hyphen. Specifies to delete the auto-learned secured entry learned with the specified VLAN. Default None. Command Mode Privileged EXEC Mode. Command Default Level Level: 12. Usage Guideline This command clears auto-learned secured entries, either dynamic or permanent. Example This example shows how to remove a specific secure address from the MAC address table. Switch# clear port-security address 0080.0070.0007 Switch# 58-2 show port-security This command is used to display the current port security settings. show port-security [[interface INTERFACE-ID [, | -]] [address] | vlan VLAN-ID [, | -]] 607
![](/manual_guide/products/dlink-dgs3130-emulator-9c3be7f/611.png)