D-Link DGS-3130 Emulator - Page 792
snmp-server enable traps sim, 10 show sim
View all D-Link DGS-3130 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 792 highlights
DGS-3130 Layer 3 Stackable Managed Switch CLI Reference Guide Switch# copy sim system-log tftp: //10.10.10.58/switchlog member 1 Upload system log from member 1 to 10.10.10.58/switchlog ?(y/n)[n]y ID MAC Address Status 1 00-02-01-03-01-03 SUCCESS Switch# 77-9 snmp-server enable traps sim This command is used to enable the sending of single IP management trap. Use the no form of this command to disable the state. snmp-server enable traps sim no snmp-server enable traps sim Parameters None. Default By default, this option is disabled. Command Mode Global Configuration Mode. Command Default Level Level: 12. Usage Guideline Use this command to enable or disable the sending of SIM traps. Example This example shows how to enable the SIM trap state. Switch#configure terminal Switch(config)#snmp-server enable traps sim Switch(config)# 77-10 show sim This command is used to display single IP management information. show sim [{candidates [CANDIDATE-ID] | members [MEMBER-ID] | group [COMMANDER-MAC] | neighbor}] 788