D-Link DGS-3130 Emulator - Page 778
snmp-server
View all D-Link DGS-3130 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 778 highlights
DGS-3130 Layer 3 Stackable Managed Switch CLI Reference Guide Command Mode User/Privileged EXEC Mode. Any Configuration Mode. Command Default Level Level: 1. Usage Guideline Use this command to display the per port trap sending state. If no optional parameter is specified, all ports will be displayed. Example This example shows how to display the trap sending state for ethernet 1/0/1 to 1/0/9. Switch#show snmp-server trap-sending interface ethernet 1/0/1-9 Port eth1/0/1 eth1/0/2 eth1/0/3 eth1/0/4 eth1/0/5 eth1/0/6 eth1/0/7 eth1/0/8 eth1/0/9 Switch# Trap Sending Enabled Enabled Enabled Enabled Enabled Enabled Enabled Enabled Enabled 76-13 snmp-server This command is used to enable the SNMP agent. Use the no form of this command to disable the SNMP agent. snmp-server no snmp-server Parameters None. Default By default, this option is disabled. Command Mode Global Configuration Mode. Command Default Level Level: 12. 774