D-Link DGS-3130 Emulator - Page 593

DGS-3130 Layer 3 Stackable Managed Switch CLI Reference Guide Command Mode Privileged EXEC Mode. Command Default Level Level: 12. Usage Guideline Use this command to clear the authentication sessions. Example This example shows how to remove authentication sessions on ethernet 1/0/1. Switch# clear authentication sessions interface ethernet 1/0/1 Switch# 55-9 authentication username mac-format This command is used to configure the MAC address format that will be used for authenticating as the username via the RADIUS server. Use the no form of this command to revert to the default setting. authentication username mac-format case {lowercase | uppercase} delimiter {hyphen | colon | dot | none} number {1 | 2 | 5} no authentication username mac-format Parameters lowercase uppercase hyphen colon dot none number Specifies that when using the lowercase format, the RADIUS authentication username will be formatted as: aa-bb-cc-dd-ee-ff. Specifies that when using uppercase format, the RADIUS authentication username will be formatted as: AA-BB-CC-DD-EE-FF. Specifies that when using "-" as delimiter, the format is: AA-BB-CC-DD-EE-FF. Specifies that when using ":" as delimiter, the format is: AA:BB:CC:DD:EE:FF. Specifies that when using "." as delimiter, the format is: AA.BB.CC.DD.EE.FF. Specifies that when not using any delimiter, the format is: AABBCCDDEEFF. Specifies the delimiter number value. Choose one of the following delimiter options: 1: Single delimiter, the format is: AABBCC.DDEEFF. 2: Double delimiters, the format is: AABB.CCDD.EEFF. 5: Multiple delimiters, the format is: AA.BB.CC.DD.EE.FF. If none is chosen for delimiter, the number does not take effect. Default The default authentication MAC address case is uppercase. The default authentication MAC address delimiter is dot. The default authentication MAC address delimiter number is 2. Command Mode Global Configuration Mode. 589