D-Link DGS-3130 Emulator - Page 586
DGS-3130 Layer 3 Stackable Managed Switch CLI Reference Guide, POLICY-NAME
![]() |
View all D-Link DGS-3130 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 586 highlights
DGS-3130 Layer 3 Stackable Managed Switch CLI Reference Guide Switch# configure terminal Switch(config)# ipv6 nd inspection policy policy1 Switch(config-nd-inspection)# device-role host Switch(config-nd-inspection)# validate source-mac Switch(config-nd-inspection)# exit Switch(config)# interface ethernet 1/0/3 Switch(config-if)# ipv6 nd inspection attach-policy policy1 Switch(config-if)# 54-5 show ipv6 nd inspection policy This command is used to display Router Advertisement (RA) guard policy information. show ipv6 nd inspection policy [POLICY-NAME] Parameters POLICY-NAME (Optional) Specifies the IPv6 RA guard policy name. Default None. Command Mode User/Privileged EXEC Mode. Any Configuration Mode. Command Default Level Level: 1. Usage Guideline If the policy name is specified, only the specified policy information is displayed. If the policy name is not specified, information is displayed for all policies. Example This example shows how to display the policy configuration for a policy named "inspect1" and all the interfaces where the policy is applied: Switch# show ipv6 nd inspection policy inspect1 Policy inspect1 configuration: Device Role: host Validate Source MAC: Enabled Target: eth1/0/1-1/0/2 Switch# 582
![](/manual_guide/products/dlink-dgs3130-emulator-9c3be7f/586.png)