D-Link DGS-3130 Emulator - Page 909

DGS-3130 Layer 3 Stackable Managed Switch CLI Reference Guide Example This example shows how to configure the priority of the virtual router to 200. Switch#configure terminal Switch(config)#interface vlan 1 Switch(config-if)#vrrp 1 priority 200 Switch(config-if)# 91-5 vrrp non-owner-ping This command is used to enable the virtual router in the master state to respond to ICMP echo requests for an IP address not owned but associated with this virtual router. Use the no form of this command to disable the response. vrrp non-owner-ping no vrrp non-owner-ping Parameters None. Default By default, this option is disabled. Command Mode Global Configuration Mode. Command Default Level Level: 12. Usage Guideline In some conditions, the virtual router in the master state needs to response ICMP echo requests for an IP address that is not owned by this virtual router. Example This example shows how to enable all virtual routers to respond to ICMP echo requests. Switch# configure terminal Switch(config)# vrrp non-owner-ping Switch(config)# 91-6 vrrp timers advertise This command is used to configure the interval between successive VRRP advertisements by the master router. Use the no form of this command to revert to the default setting. vrrp VRID timers advertise INTERVAL no vrrp VRID timers advertise 905