D-Link DGS-3130 Emulator - Page 681
Remote Network MONitoring RMON, Commands
View all D-Link DGS-3130 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 681 highlights
DGS-3130 Layer 3 Stackable Managed Switch CLI Reference Guide 65. Remote Network MONitoring (RMON) Commands 65-1 rmon collection stats This command is used to enable RMON statistics on the configured interface. Use the no form of this command to disable the RMON statistics. rmon collection stats INDEX [owner NAME] no rmon collection stats INDEX Parameters INDEX owner NAME Specifies the RMON table index. The range is from 1 to 65535. Specifies the owner string. The maximum length is 127. Default By default, this option is disabled. Command Mode Interface Configuration Mode. Command Default Level Level: 12. Usage Guideline The RMON statistics group entry number is dynamic. Only the interface that is enabled for RMON statistics will have a corresponding entry in the table. Example This example shows how to configure an RMON statistics entry with an index of 65 and the owner name "guest" on ethernet 1/0/2. Switch# configure terminal Switch(config)# interface ethernet 1/0/2 Switch(config-if)# rmon collection stats 65 owner guest Switch(config-if)# 65-2 rmon collection history This command is used to enable RMON MIB history statistics gathering on the configured interface. Use the no form of this command to disable history statistics gathering on the interface. rmon collection history INDEX [owner NAME] [buckets NUM] [interval SECONDS] no rmon collection history INDEX 677