D-Link DGS-3130 Emulator - Page 597

DGS-3130 Layer 3 Stackable Managed Switch CLI Reference Guide - mac-address MACADDRESS (Optional) Specifies a range of interfaces. No space is allowed before or after the hyphen. (Optional) Specifies to display a specific user. Default None. Command Mode User/Privileged EXEC Mode. Any Configuration Mode. Command Default Level Level: 1. Usage Guideline Use this command without parameters to display the sessions associated with all ports. Example This example shows how to display sessions on ethernet 1/0/1. Switch# show authentication sessions interface ethernet 1/0/1 Interface: eth1/0/1 MAC Address: 00-16-76-35-1A-38 Authentication VLAN: 1 Authentication State: Success Accounting Session ID: 0000000000CB Authentication Username: wac Client IP Address: 10.90.90.9 Aging Time: 3590 sec Method State WEB-based Access Control: Success, Selected Total Authenticating Hosts: 0 Total Authenticated Hosts: 1 Total Blocked Hosts: 0 Switch# Display Parameters Interface MAC Address Authentication VLAN Authentication State The authentication host received interface. The MAC address of authentication host. The original VLAN of the host start authentication. The authentication status of host. Start - Host received, but no any authentication start. Initialization - Authentication resource ready, but no new authentication start. Authenticating - Host is under authenticating. Failure - Authentication failure. 593