D-Link DGS-3130 Emulator - Page 116
show aaa, tacacs-server host
![]() |
View all D-Link DGS-3130 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 116 highlights
DGS-3130 Layer 3 Stackable Managed Switch CLI Reference Guide Switch#configure terminal Switch(config)# tacacs-server host 172.19.10.100 port 1500 timeout 8 key ABCDE Switch(config)# tacacs-server host 172.19.122.3 port 1600 timeout 3 key ABCDE Switch(config)#aaa group server tacacs+ group2 Switch(config-sg-tacacs+)# server 172.19.10.100 Switch(config-sg-tacacs+)# server 172.19.122.3 Switch(config-sg-tacacs+)# 8-26 show aaa This command is used to display the AAA global state. show aaa Parameters None. Default None. Command Mode Privileged EXEC Mode. Any Configuration Mode. Command Default Level Level: 1. Usage Guideline Use this command to display the AAA global state. Example This example shows how to display the AAA global state. Switch# show aaa AAA is enabled. Switch# 8-27 tacacs-server host This command is used to create a TACACS+ server host. Use the no form of this command to remove a server host. tacacs-server host {IP-ADDRESS | IPV6-ADDRESS} [port PORT] [timeout SECONDS] key [0 | 7] KEYSTRING no tacacs-server host {IP-ADDRESS | IPV6-ADDRESS} 112
![](/manual_guide/products/dlink-dgs3130-emulator-9c3be7f/116.png)