D-Link DGS-3130 Emulator - Page 589
authentication periodic, authentication timer inactivity
View all D-Link DGS-3130 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 589 highlights
DGS-3130 Layer 3 Stackable Managed Switch CLI Reference Guide 55-3 authentication periodic This command is used to enable periodic re-authentication for a port. Use the no form of this command to disable periodic re-authentication. authentication periodic no authentication periodic Parameters None. Default By default, this option is disabled. Command Mode Interface Configuration Mode. Command Default Level Level: 12. Usage Guideline Use this command to enable periodic re-authentication for a port. Use the authentication timer reauthentication command to configure the re-authentication timer. Example This example shows how to enable periodic re-authentication on Ethernet port 1/0/1. Switch# configure terminal Switch(config)# interface ethernet 1/0/1 Switch(config-if)# authentication periodic Switch(config-if)# 55-4 authentication timer inactivity This command is used to configure the timer after which an inactive session is terminated. Use the no form of this command to disable the inactivity timer authentication timer inactivity {SECONDS} no authentication timer inactivity Parameters SECONDS Specifies to configure the timer after which an inactive session is terminated. The range is from 120 to 65535. Default By default, this option is disabled. 585