D-Link DGS-3130 Emulator - Page 912
vrrp track critical-ip
View all D-Link DGS-3130 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 912 highlights
DGS-3130 Layer 3 Stackable Managed Switch CLI Reference Guide Switch# configure terminal Switch(config)# interface vlan 1 Switch(config-if)# vrrp 1 shutdown Switch(config-if)# no vrrp 2 shutdown Switch(config-if)# 91-9 vrrp track critical-ip This command is used to configure the critical IP address of a virtual router. Use the no form of this command to remove the critical IP address. vrrp VRID track critical-ip IP-ADDRESS no vrrp VRID track critical-ip Parameters VRID IP-ADDRESS Specifies the virtual router identifier that identifies the VRRP group. The valid range is from 1 to 255. Specifies the critical IP address. Default None. Command Mode Interface Configuration Mode. Command Default Level Level: 12. Usage Guideline This command is used to set the critical IP address for one virtual router. If the critical IP is configured on one virtual router, the virtual router cannot be activated when the critical IP address is unreachable. One VRRP group can only track one critical IP. Example This example shows how to configure the critical IP address of virtual router 1 on VLAN 1. Switch# configure terminal Switch(config)# interface vlan 1 Switch(config-if)# vrrp 1 track critical-ip 192.168.100.1 Switch(config-if)# 908