D-Link DGS-3130 Emulator - Page 65

DGS-3130 Layer 3 Stackable Managed Switch CLI Reference Guide Command Mode User/Privileged EXEC Mode. Any Configuration Mode. Command Default Level Level: 1. Usage Guideline This command displays access list information. If no option is specified, a listing of all configured access lists is displayed. If the type of access list is specified, detailed information of the access list will be displayed. If the user enables the ACL hardware counter for an access list, the counter will be displayed based on each access list entry. Example This example shows how to display all access lists. Switch#show access-list Access-List-Name Strict-Control(ID: 3999) daily-profile(ID: 7999) exp_acl(ID: 9999) ip6-control(ID: 14999) Type ip ext-acl mac ext-acl expert ext-acl ipv6 ext-acl Total Entries: 4 Switch# This example shows how to display the IP access list called Strict-Control. Switch#show access-list ip Strict-Control Extended IP access list Strict-Control(ID: 3999) 10 permit any 10.20.0.0 0.0.255.255 20 permit any host 10.100.1.2 Switch# This example shows how to display the content for the access list if its hardware counter is enabled. Switch# show access-list ip simple-ip-acl Extended IP access simple-ip-acl(ID:3994) 10 permit tcp any 10.20.0.0 0.0.255.255 (Ing: 12410 packets Egr: 85201 packets) 20 permit tcp any host 10.100.1.2 (Ing: 6532 packets Egr: 0 packets) 30 permit icmp any any (Ing: 8758 packets Egr: 4214 packets) Counter enable on following port(s): Ingress port(s): eth1/0/5-1/0/8 Egress port(s): eth1/0/3 Switch# 61