D-Link DGS-3130 Emulator - Page 313
ip name-server
![]() |
View all D-Link DGS-3130 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 313 highlights
DGS-3130 Layer 3 Stackable Managed Switch CLI Reference Guide IPV6-ADDRESS Specifies the IPv6 address of the equipment. Default None. Command Mode Global Configuration Mode. Command Default Level Level: 12. Usage Guideline The host name specified in this command needs to be qualified. To delete a static host entry, use the no command. Example This example shows how to configure the mapping of the host name "www.abc.com" and the IP address 192.168.5.243. Switch# configure terminal Switch(config)# ip host www.abc.com 192.168.5.243 Switch(config)# 28-6 ip name-server This command is used to configure the IP address of a domain name server. Use the no form of this command to delete the configured domain name server. ip name-server {IP-ADDRESS | IPV6-ADDRESS} [{IP-ADDRESS2 | IPV6-ADDRESS2}] no ip name-server {IP-ADDRESS | IPV6-ADDRESS} [{IP-ADDRESS2 | IPV6-ADDRESS2}] Parameters IP-ADDRESS IPV6-ADDRESS IP-ADDRESS2 IPV6-ADDRESS2 Specifies the IPv4 address of the domain name server. Specifies the IPv6 address of the domain name server. Specifies multiple IP addresses, separated by spaces. Up to two servers can be specified. Specifies multiple IPv6 addresses, separated by spaces. Up to two servers can be specified. Default None. Command Mode Global Configuration Mode. 309
![](/manual_guide/products/dlink-dgs3130-emulator-9c3be7f/313.png)