D-Link DGS-3130 Emulator - Page 757

DGS-3130 Layer 3 Stackable Managed Switch CLI Reference Guide Switch# configure terminal Switch(config)# interface ethernet 1/0/1 Switch(config-if)# sflow poller 1 receiver 1 interval 20 Switch(config-if)# 74-4 show sflow This command is used to display sFlow information. show sflow [agent | receiver | sampler | poller] Parameters agent receiver sampler poller (Optional) Specifies to display sFlow agent information. (Optional) Specifies to display information of all receivers. (Optional) Specifies to display information of all samplers. (Optional) Specifies to display information of all pollers. Default None. Command Mode User/Privileged EXEC Mode. Any Configuration Mode. Command Default Level Level: 1. Usage Guideline This command is used to display sFlow information. If the MIB is not supported, the MIB version in the sFlow Agent Version string will be null. If the vendor changes, the organization name in the sFlow Agent Version string will change too. Example This example shows how to display all types of sFlow objects' information. 753