D-Link DGS-3130 Emulator - Page 366
port1
![]() |
View all D-Link DGS-3130 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 366 highlights
DGS-3130 Layer 3 Stackable Managed Switch CLI Reference Guide Command Mode ERPS Configuration Mode. Command Default Level Level: 12. Usage Guideline Use this command to configure the first ring port of a physical ring. Example This example shows how to configure the ethernet 1/0/1 as the first ring port of the G.8032 ring "major-ring". Switch#configure terminal Switch(config)#ethernet ring g8032 major-ring Switch(config-erps-ring)#port0 interface ethernet 1/0/1 Switch(config-erps-ring)# 33-13 port1 This command is used to specify the second ring port of a physical ring. Use the no form of this command to remove the second ring port setting. port1 {interface INTERFACE-ID | none} no port1 Parameters INTERFACE-ID none Specifies the second ring port. It can be a physical port or port-channel interface. Specifies none to indicate that the interconnect node is a local node endpoint of a sub-ring. Default None. Command Mode ERPS Configuration Mode. Command Default Level Level: 12. Usage Guideline Use this command to configure the second ring port of a physical ring. Use the port1 none command to indicate that the interconnect node is a local node endpoint of a sub-ring. Example This example shows how to configure the interconnect node as a local end node of the G.8032 ring "ring2". 362
![](/manual_guide/products/dlink-dgs3130-emulator-9c3be7f/366.png)