D-Link DGS-3130 Emulator - Page 277

DGS-3130 Layer 3 Stackable Managed Switch CLI Reference Guide Command Default Level Level: 12. Usage Guideline Use this command to configure the Option 37 expert UDF string per port. Example This example shows how to configure the Option 37 on port ethernet 1/0/1 to use "profile1". Switch#configure terminal Switch(config)#interface ethernet 1/0/1 Switch(config-if)#ipv6 dhcp relay remote-id format-type expert-udf profile1 Switch(config-if)# 24-19 ipv6 dhcp relay interface-id format-type expert-udf This command is used to configure the Option 18 expert UDF string per port. Use the no form of this command to revert to the default setting. ipv6 dhcp relay interface-id format-type expert-udf STRING no ipv6 dhcp relay interface-id format-type expert-udf Parameters STRING Specifies the profile name of Option 18. Default None. Command Mode Interface Configuration Mode. Command Default Level Level: 12. Usage Guideline Use this command to configure the Option 18 expert UDF string per port. Example This example shows how to configure the Option 18 on port ethernet 1/0/1 to use "profile2". Switch#configure terminal Switch(config)#interface ethernet 1/0/1 Switch(config-if)#ipv6 dhcp relay interface-id format-type expert-udf profile2 Switch(config-if)# 273