D-Link DGS-3130 Emulator - Page 569
show ipv6 mld snooping static-group
![]() |
View all D-Link DGS-3130 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 569 highlights
DGS-3130 Layer 3 Stackable Managed Switch CLI Reference Guide Command Default Level Level: 1. Usage Guideline Use this command to display dynamically learned or manually configured multicast router interfaces. Example This example shows how to display MLD snooping multicast router information. Switch#show ipv6 mld snooping mrouter VLAN ----1 Ports 1/0/3, 1/0/4 (static) 1/0/6 (forbidden) 1/0/7 (dynamic) 3 1/0/8 (static) 1/0/9 (dynamic) Total Entries: 2 Switch# 52-24 show ipv6 mld snooping static-group This command is used to display statically configured MLD snooping groups on the Switch. show ipv6 mld snooping static-group [GROUP-ADDRESS | vlan VLAN-ID] Parameters GROUP-ADDRESS vlan VLAN-ID (Optional) Specifies the group IPv6 address to be displayed. (Optional) Specifies the VLAN ID to be displayed. Default None. Command Mode User/Privileged EXEC Mode. Any Configuration Mode. Command Default Level Level: 1. Usage Guideline This command is used to display statically configured MLD snooping groups on the Switch. If no optional parameter is specified, all information will be displayed. 565
![](/manual_guide/products/dlink-dgs3130-emulator-9c3be7f/569.png)