D-Link DGS-3130 Emulator - Page 481
permit link-local, validate address
View all D-Link DGS-3130 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 481 highlights
DGS-3130 Layer 3 Stackable Managed Switch CLI Reference Guide Example This example shows how to deny auto-configured traffic. Switch# configure terminal Switch(config)# ipv6 source-guard policy policy1 Switch(config-source-guard)# deny global-autoconfig Switch(config-source-guard)# 44-4 permit link-local This command is used to allow hardware permitted data traffic to be sent by the link-local address. Use the no form of this command to disable this function permit link-local no permit link-local Parameters None. Default By default, this option is disabled. Command Mode Source-guard Policy Configuration Mode. Command Default Level Level: 12. Usage Guideline The command is used to enable hardware to permit data traffic sent by the link-local address. Example This example shows how to allow all data traffic that is sent by the link-local address. Switch# configure terminal Switch(config)# ipv6 source-guard policy policy1 Switch(config-source-guard)# permit link-local Switch(config-source-guard)# 44-5 validate address This command is used to enable the IPv6 source guard function to perform the validate address feature. Use the no form of this command to disable the validate address feature. validate address no validate address 477