D-Link DGS-3130 Emulator - Page 643

Default None. DGS-3130 Layer 3 Stackable Managed Switch CLI Reference Guide Command Mode User/Privileged EXEC Mode. Any Configuration Mode. Command Default Level Level: 1. Usage Guideline This command displays the brief information for the working routing entries. Example This example shows how to display the brief information for the working routing entries. Switch#show ip route summary Route Source Connected Static RIP OSPF BGP ISIS Total Multi-path Networks 3 1 2 8 0 1 15 0 Switch# 62-12 show ipv6 route This command is used to display the entry in routing table. show ipv6 route [[IPV6-ADDRESS | NETWORK-PREFIX/PREFIX-LENGTH | INTERFACE-ID | PROTOCOL] [database]] Parameters IPV6-ADDRESS NETWORK-PREFIX PREFIX-LENGTH INTERFACE-ID PROTOCOL database (Optional) Specifies an IPv6 address to find a longest prefix matched IPv6 route. (Optional) Specifies the network address of which routing information should be displayed. (Optional) Specifies the prefix length for the specified network (Optional) Specifies the interface type. (Optional) Specifies the routing protocol. (Optional) Specifies to display all the related entries in the routing database instead of just the best route. 639