D-Link DGS-3130 Emulator - Page 444
ip igmp snooping report-suppression
View all D-Link DGS-3130 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 444 highlights
DGS-3130 Layer 3 Stackable Managed Switch CLI Reference Guide Default By default, this option is disabled. Command Mode Interface Configuration Mode. Command Default Level Level: 12. Usage Guideline The command is available for VLAN interface configuration, physical port or port-channel interface. The command configures the rate of IGMP control packet that can be processed by IGMP snooping. Example This example shows how to limit 30 packets per second on interface VLAN 1000. Switch# configure terminal Switch(config)# vlan 1000 Switch(config-vlan)# ip igmp snooping rate-limit 30 Switch(config-vlan)# 39-17 ip igmp snooping report-suppression This command is used to enable the report suppression. Use the no form of this command to disable the report suppression. ip igmp snooping report-suppression no ip igmp snooping report-suppression Parameters None. Default By default, this option is disabled. Command Mode Interface Configuration Mode. Command Default Level Level: 12. Usage Guideline This command is only available for VLAN interface configuration. The report suppression function only works for IGMPv1 and IGMPv2 traffic. When report suppression is enabled, the Switch suppresses the duplicate reports sent by hosts. The suppression for the same group report or leave will continue until the suppression time expired. For report or leave messages to the same group, only one report or leave message is forwarded. The remaining report and leave messages are suppressed. 440