D-Link DGS-3130 Emulator - Page 391
show mac-address-table
View all D-Link DGS-3130 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 391 highlights
DGS-3130 Layer 3 Stackable Managed Switch CLI Reference Guide Example This example shows how to set the multicast filtering mode on VLAN 100 to filter unregistered. Switch# configure terminal Switch(config)# vlan 100 Switch(config-vlan)# multicast filtering-mode filter-unregistered Switch(config-vlan)# 35-8 show mac-address-table This command is used to display a specific MAC address entry or the MAC address entries for a specific interface or VLAN. show mac-address-table [dynamic | static] [address MAC-ADDR | interface [INTERFACE-ID | vlan VLANID] Parameters dynamic static address MAC-ADDR interface INTERFACE-ID vlan VLAN-ID (Optional) Specifies to display dynamic MAC address table entries only. (Optional) Specifies to display static MAC address table entries only. (Optional) Specifies the 48-bit MAC address. (Optional) Specifies to display information for a specific interface. Valid interfaces include physical ports and port-channels. (Optional) Specifies the VLAN ID. The valid values are from 1 to 4094. Default None. Command Mode User/Privileged EXEC Mode. Any Configuration Mode. Command Default Level Level: 1. Usage Guideline If the option interface is specified, the unicast entry that has the forwarding interface matches the specified interface will be displayed Example This example shows how to display all the MAC address table entries for the MAC address 00-23-7D-BC-08-44. 387