D-Link DGS-3130 Emulator - Page 590
authentication timer reauthentication
![]() |
View all D-Link DGS-3130 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 590 highlights
DGS-3130 Layer 3 Stackable Managed Switch CLI Reference Guide Command Mode Interface Configuration Mode. Command Default Level Level: 12. Usage Guideline When the inactivity timer is configured, a user session will be terminated if the session sustains no activity for the configured period of time. If the inactivity timer is configured, it should be shorter than the timer value configured by authentication timer re-authentication command. Example This example shows how to configure the inactivity timer to 240 for Ethernet 1/0/1. Switch# configure terminal Switch(config)# interface ethernet 1/0/1 Switch(config-if)# authentication timer inactivity 240 Switch(config-if)# 55-5 authentication timer reauthentication This command is used to configure the timer to re-authenticate a session. Use the no form of this command to revert the setting to default. authentication timer reauthentication {SECONDS} no authentication timer reauthentication Parameters SECONDS Specifies the timer to re-authenticate a session. The range is from 1 to 65535. Default By default, this value is 3600 seconds. Command Mode Interface Configuration Mode. Command Default Level Level: 12. Usage Guideline Use this command to configure the re-authentication timer. Use the authentication periodic command to determine whether re-authentication will occur. Example This example shows how to configure the re-authentication timer value to 200 for Ethernet 1/0/1. 586
![](/manual_guide/products/dlink-dgs3130-emulator-9c3be7f/590.png)