D-Link DGS-3130 Emulator - Page 523

DGS-3130 Layer 3 Stackable Managed Switch CLI Reference Guide Switch# show lldp management-address Address 1 : (default) Subtype : IPv4 Address : 10.90.90.90 IF Type : IfIndex OID : 1.3.6.1.4.1.171.10.118.2 Advertising Ports : - Address 2 : Subtype : IPv4 Address : 10.90.90.90 IF Type : IfIndex OID : 1.3.6.1.4.1.171.10.118.2 Advertising Ports : - Total Entries : 2 Switch# 48-24 show lldp neighbor interface This command is used to display the information currently learned from the neighbor on the specific physical interface. show lldp neighbors interface INTERFACE-ID [, | -] [brief | detail] Parameters INTERFACE-ID , - brief detail Specifies the interface ID. Valid interfaces are physical interfaces. (Optional) Specifies a series of interfaces or separates a range of interfaces from a previous range. No space is allowed before or after the comma. (Optional) Specifies a range of interfaces. No space is allowed before or after the hyphen. (Optional) Specifies to display the information in brief mode. (Optional) Specifies to display the information in detailed mode. If neither brief nor detail is specified, display the information in normal mode. Default None. Command Mode User/Privileged EXEC Mode. Any Configuration Mode. Command Default Level Level: 1. 519