D-Link DGS-3130 Emulator - Page 785
snmp trap link-status
View all D-Link DGS-3130 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 785 highlights
DGS-3130 Layer 3 Stackable Managed Switch CLI Reference Guide Switch# configure terminal Switch(config)# snmp-server response broadcast-request Switch(config)# 76-22 snmp trap link-status This command is used to enable the notification of link-up and link-down events that occurred on the interface. Use the no form of this command to disable the notification. snmp trap link-status no snmp trap link-status Parameters None. Default By default, this option is enabled. Command Mode Interface Configuration Mode. Command Default Level Level: 12. Usage Guideline This command is used to enable or disable the sending of link-up and link-down traps on an interface. Example This example shows how to disable the generation of link-up and link-down traps on ethernet 1/0/1. Switch# configure terminal Switch(config)# interface ethernet 1/0/1 Switch(config-if)# no snmp trap link-status Switch(config-if)# 781