D-Link DGS-3130 Emulator - Page 516

DGS-3130 Layer 3 Stackable Managed Switch CLI Reference Guide Usage Guideline Use the lldp notification enable command to enable the sending of LLDP notifications. Use the lldp med notification enable command to enable the sending of LLDP-MED notifications. Example This example shows how to enable the sending of LLDP MED notifications for Ethernet 1/0/1. Switch# configure terminal Switch(config)# interface ethernet 1/0/1 Switch(config-if)# lldp med notification enable Switch(config-if)# 48-19 lldp subtype This command is used to configure the subtype of LLDP TLV(s). lldp subtype port-id {mac-address | local} Parameters port-id mac-address local Specifies the subtype of the port ID TLV. Specifies the subtype of the port ID TLV as "MAC Address (3)" and the field of "port ID" to be encoded with the MAC address. Specifies the subtype of the port ID TLV as "Locally assigned (7)" and the field of "port ID" to be encoded with the port number. Default The subtype of port ID TLV is local (port number). Command Mode Interface Configuration Mode. Command Default Level Level: 12. Usage Guideline Use this command to specify the subtype of LLDP TLV(s). A port ID subtype is used to indicate how the port is being referenced in the port ID field. Example This example shows how to configure the subtype of the port ID TLV to mac-address. Switch# configure terminal Switch(config)# interface ethernet 1/0/1 Switch(config-if)# lldp subtype port-id mac-address Switch(config-if)# 512