D-Link DGS-3130 Emulator - Page 520

DGS-3130 Layer 3 Stackable Managed Switch CLI Reference Guide Display Parameters Enabled Management Address Displays the enabled IPv4/IPv6 addresses. '(None)' means that the user did not configure the management address with the lldp management-address command or the enabled default IPv4 and IPv6 addresses are not applicable. Enabled Port and Protocol Displays enabled port and protocol VLANs. The VLAN list is the configured and VLAN ID enabled VLANs. If there is no configured PPVID VLAN, '(None)' is displayed. Enabled VLAN Name Displayed enabled VLANs for sending VLAN Name TLVs. The VLAN list includes the configured and enabled VLANs. If there is no configured VLAN for the VLAN Name TLV, '(None)' is displayed. Enabled Protocol Identity Displays the enabled protocol string for protocol identity TLVs. If there is no enabled protocol for the protocol identity TLV, '(None)' is displayed. 48-22 show lldp local interface This command is used to display physical interface information that will be carried in the LLDP TLVs and sent to neighbor devices. show lldp local interface INTERFACE-ID [, | -] [brief | detail] Parameters INTERFACE-ID , - brief detail Specifies the interface ID. Valid interfaces are physical interfaces. (Optional) Specifies a series of interfaces or separates a range of interfaces from a previous range. No space is allowed before or after the comma. (Optional) Specifies a range of interfaces. No space is allowed before or after the hyphen. (Optional) Specifies to display the information in brief mode. (Optional) Specifies to display the information in detailed mode. If neither brief nor detail is specified, display the information in the normal mode. Default None. Command Mode User/Privileged EXEC Mode. Any Configuration Mode. Command Default Level Level: 1. Usage Guideline This command displays each physical interface's local LLDP information currently available for populating outbound LLDP advertisements. Example This example shows how to display the local information of port 1 in detailed mode. 516