D-Link DGS-3130 Emulator - Page 38

DGS-3130 Layer 3 Stackable Managed Switch CLI Reference Guide Command Mode User/Privileged EXEC Mode. Any Configuration Mode. Command Default Level Level: 1. Usage Guideline This command can be used to display the global configuration or interface configuration. If the configuration command is entered without parameters, the global configuration will be displayed. Otherwise, the configuration on the specified interface will be displayed. Example This example shows how to display the dot1X global configuration. Switch#show dot1x 802.1X Trap State : Enabled : Enabled Switch# This example shows how to display the dot1X configuration on ethernet 1/0/1. Switch#show dot1x interface ethernet 1/0/1 Interface : eth1/0/1 PAE : Authenticator Control Direction : Both Port Control : Auto Tx Period : 30 sec Supp Timeout : 30 sec Server Timeout : 30 sec Max-req : 2 times Forward PDU : Enabled Switch# 3-13 show dot1x diagnostics This command is used to display IEEE 802.1X diagnostics. show dot1x diagnostics [interface INTERFACE-ID [, | -]] Parameters interface INTERFACE-ID , (Optional) Specifies to display the dot1x diagnostics on the specified interface or range of interfaces. If not specified, information about all interfaces will be displayed. (Optional) Specifies a series of interfaces or separates a range of interfaces from a previous range. No space is allowed before or after the comma. 34