D-Link DGS-3130 Emulator - Page 845
clear running-config
![]() |
View all D-Link DGS-3130 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 845 highlights
DGS-3130 Layer 3 Stackable Managed Switch CLI Reference Guide Command Mode Global Configuration Mode. Command Default Level Level: 15. Usage Guideline When using the boot image command, the associated specified boot image file will be the startup boot image file for the next reboot. Use this command to assign a file as the next-boot image file. The system will check the model and checksum to determine whether the file is a valid image file. The purpose of the check parameter is for checking the file information to let the user understand whether the specified file is suitable to be a boot image or not. The setting of the boot image command will immediately be stored in the NVRAM, which is a space separated from the start-up configuration. The backup image is decided automatically and is the newest valid image other than the boot-up one. Example This example shows how to specify that the Switch should use the image file named 'switch-image1.had' as the boot image file for the next startup. Switch# configure terminal Switch(config)# boot image c:/switch-image1.had Switch(config)# This example shows how to check a specified image file called "c:/runtime.switch.had". The checksum of the image file has been verified is okay and the information of the image file is displayed. Switch#configure terminal Switch(config)#boot image check c:/runtime.wrongswitch.had Image information Version: 1.00.001 Description: D-Link Corporation TenGigabit Ethernet Switch Switch(config)# This example shows how to checks a specified image file called "runtime.wrongswitch.had". The checksum of the image file has been verified wrong and an error message is displayed. Switch# configure terminal Switch(config)# boot image check runtime.wrongswitch.had ERROR: Invalid firmware image. Switch(config)# 84-3 clear running-config This command is used to clear the system's running configuration. clear running-config Parameters None. 841
![](/manual_guide/products/dlink-dgs3130-emulator-9c3be7f/845.png)