D-Link DGS-3130 Emulator - Page 264

DGS-3130 Layer 3 Stackable Managed Switch CLI Reference Guide 24-6 show ipv6 dhcp This command is used to display the DHCPv6 related settings on the interface. show ipv6 dhcp [interface [INTERFACE-ID]] Parameters INTERFACE-ID (Optional) Specifies the VLAN interface ID to display. Default None. Command Mode User/Privileged EXEC Mode. Any Configuration Mode. Command Default Level Level: 1. Usage Guideline Use this command to display the device's DHCPv6 DUID or use the show ipv6 dhcp interface command to display DHCPv6 related settings and information for the specified VLAN interface. If the interface ID is not specified, all interfaces that are enabled for the DHCPv6 function will be displayed. Example This example shows how to display the DHCPv6 settings for VLAN 1, which is in the DHCPv6 relay mode. Switch # show ipv6 dhcp interface vlan 1 vlan 1 is in relay mode Relay destinations: FE80::20A:BBFF:FECC:102 via vlan 2 Switch # This example shows how to display DHCPv6 information for the interface VLAN 1 when VLAN 1 is not in the DHCPv6 mode. Switch# show ipv6 dhcp interface vlan 1 vlan 1 is not in DHCPv6 mode Switch# 24-7 show ipv6 dhcp relay information option This command is used to display settings of the DHCPv6 relay information options. 260