D-Link DGS-3130 Emulator - Page 692
match metric, route map
![]() |
View all D-Link DGS-3130 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 692 highlights
DGS-3130 Layer 3 Stackable Managed Switch CLI Reference Guide 66-5 match metric This command is used to define a clause to match the route's metric. Use the no form of this command to remove the clause. match metric VALUE no match metric Parameters VALUE Specifies the metric of route. The range is from 0 to 4294967294. Default None. Command Mode Route-map Configuration Mode. Command Default Level Level: 12. Usage Guideline Use this command in the route map configure mode to define a rule for matching routes' metric. Example This example shows how to create a route map entry to match against the metric of routes. Switch# configure terminal Switch(config)# route-map myPolicy permit 1 Switch(config-route-map)# match metric 10 Switch(config-route-map)# 66-6 route map This command is used to create a route map rule entry. Use the no form of this command to remove a route map rule entry. route-map MAP-NAME {permit | deny} SEQ-NUMBER no route-map MAP-NAME {permit | deny} SEQ-NUMBER Parameters MAP-NAME permit deny SEQ-NUMBER Specifies the name of the route map. Specifies that routes that match the rule entry are permitted. Specifies that routes that match the rule entry are denied. Specifies the sequence number for the route map entry. The value range is from 1 to 65535. 688
![](/manual_guide/products/dlink-dgs3130-emulator-9c3be7f/692.png)