D-Link DGS-3130 Emulator - Page 414

DGS-3130 Layer 3 Stackable Managed Switch CLI Reference Guide Switch# configure terminal Switch(config)# no interface loopback2 Switch (config)# 38-4 interface range This command is used to enter the interface range configuration mode for multiple interfaces. interface range INTERFACE-ID [, | -] Parameters INTERFACE-ID , - Specifies the ID of the interface. The interface ID is formed by interface type and interface number with no spaces in between. (Optional) Specifies a series of interfaces or separates a range of interfaces from a previous range. No space is allowed before or after the comma. (Optional) Specifies a range of interfaces. No space is allowed before or after the hyphen. Default None. Command Mode Global Configuration Mode. Command Default Level Level: 12. Usage Guideline This command enters the interface configuration mode for the specified range of interfaces. Commands configured in the interface range mode, applies to interfaces in the range. Example This example shows how to enter the interface configuration mode for the range of ports 2/0/1 to 2/0/5: and port 3/0/3. Switch# configure terminal Switch(config)# interface range Ethernet 2/0/1-5, 3/0/3 Switch(config-if-range)# 38-5 show counters This command is used to display interface information. 410