D-Link DGS-3130 Emulator - Page 921

DGS-3130 Layer 3 Stackable Managed Switch CLI Reference Guide 93. Web Authentication Commands 93-1 web-auth enable This command is used to enable the Web authentication function on the port. Use the no form of this command to disable the Web authentication function. web-auth enable no web-auth enable Parameters None. Default By default, this option is disabled. Command Mode Interface Configuration Mode. Command Default Level Level: 12. Usage Guideline This command allows hosts connected to the port to do authentication via the Web browser. Example This example shows how to enable the Web authentication function on ethernet 1/0/1. Switch# configure terminal Switch(config)# interface ethernet 1/0/1 Switch(config-if)# web-auth enable Switch(config-if)# 93-2 web-auth page-element This command is used to customize the Web authentication page elements. Use the no form of this command to return to the default setting. web-auth page-element {page-title STRING | login-window-title STRING | username-title STRING | password-title STRING | logout-window-title STRING | copyright-line LINE-NUMBER title STRING} no web-auth page-element {page-title | login-window-title | username-title | password-title | logoutwindow-title | copyright-line} Parameters page-title STRING login-window-title STRING Specifies the title of the Web authentication page. The maximum number can be up to 128 characters. Specifies the title of the Web authentication login window. The maximum number can be up to 64 characters. 917