D-Link DGS-3130 Emulator - Page 314
ip name-server timeout
View all D-Link DGS-3130 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 314 highlights
DGS-3130 Layer 3 Stackable Managed Switch CLI Reference Guide Command Default Level Level: 12. Usage Guideline Use this command to configure a DNS server. When the system cannot obtain an answer from a DNS server, it will attempt the subsequent server until it receives a response. If name servers are already configured, the servers configured later will be added to the server list. The user can configure up to 4 name servers. Example This example shows how to configure the domain name server 192.168.5.134 and 5001:5::2. Switch# configure terminal Switch(config)# ip name-server 192.168.5.134 5001:5::2 Switch(config)# 28-7 ip name-server timeout This command is used to configure the timeout value for the name server. Use the no form of this command to revert to the default setting. ip name-server timeout SECONDS no ip name-server timeout Parameters SECONDS Specifies the maximum time to wait for a response from a specified name server. This value must be between 1 and 60. Default By default, this value is 3 seconds. Command Mode Global Configuration Mode. Command Default Level Level: 12. Usage Guideline Use this command to configure the DNS maximum time value to wait for a response from a specified name server. Example This example shows how to configure the timeout value to 5 seconds. Switch# configure terminal Switch(config)# ip name-server timeout 5 Switch(config)# 310