D-Link DGS-3130 Emulator - Page 511
lldp forward, 13 lldp tlv-select
View all D-Link DGS-3130 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 511 highlights
DGS-3130 Layer 3 Stackable Managed Switch CLI Reference Guide Example This example shows how to enable LLDP. Switch# configure terminal Switch(config)# lldp run Switch(config)# 48-12 lldp forward This command is used to enable the LLDP forwarding state. Use the no form of this command to revert to the default setting. lldp forward no lldp forward Parameters None. Default By default, this option is disabled. Command Mode Global Configuration Mode. Command Default Level Level: 12. Usage Guideline This is a global control for the LLDP forward. When the LLDP global state is disabled and LLDP forwarding is enabled, the received LLDPDU packet will be forwarded. Example This example shows how to enable the LLDP global forwarding state. Switch# configure terminal Switch(config)# lldp forward Switch(config)# 48-13 lldp tlv-select This command is used to select the TLVs in the 802.1AB basic management set and will be transmitted and encapsulated in the LLDPDUs and sent to neighbor devices. Use the no form of this command to revert to the default setting. lldp tlv-select [port-description | system-capabilities | system-description | system-name] no lldp tlv-select [port-description | system-capabilities | system-description | system-name] 507