D-Link DGS-3130 Emulator - Page 641
show ip route
![]() |
View all D-Link DGS-3130 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 641 highlights
DGS-3130 Layer 3 Stackable Managed Switch CLI Reference Guide Usage Guideline Use this command to display the status of the routing processes. If no option is specified, all running routing processes are displayed. Example This example shows how to display the routing protocol information. Switch#show ip protocols Routing Protocol is RIP Sending updates every 10 seconds, next due in 5 seconds Invalid 80 secs, flush 160 secs Default redistribution metric is 0 Default version control: send version 1, receive any version Interface Send Recv vlan 11 1 1 2 vlan 1 1 1 2 Maximum path: 1 Routing for Networks: vlan 11 (11.0.0.3/255.0.0.0) vlan 1 (107.100.0.1/255.255.0.0) Routing Information Sources: Gateway Last Update 11.0.0.2 22:54:09 11.0.0.5 22:53:59 11.0.0.254 22:53:51 Distribute list: East branch (in) Interface in Distance:100 Switch# 62-10 show ip route This command is used to display the entry in the routing table. show ip route [[IP-ADDRESS [MASK] | PROTOCOL]] Parameters IP-ADDRESS MASK PROTOCOL (Optional) Specifies the network address of which routing information should be displayed. (Optional) Specifies the subnet mask for the specified network. (Optional) Specifies the routing protocol, or the following keywords: static, connected. Default None. Command Mode User/Privileged EXEC Mode. 637
![](/manual_guide/products/dlink-dgs3130-emulator-9c3be7f/641.png)