D-Link DGS-3130 Emulator - Page 362
level
View all D-Link DGS-3130 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 362 highlights
DGS-3130 Layer 3 Stackable Managed Switch CLI Reference Guide Command Default Level Level: 12. Usage Guideline Use this command to create an ERPS instance under a physical ring. Deploy multiple instances in the same physical ring topology provide the load balancing capability. The ID of ERPS instances in physical rings of the system are global significant. Example This example shows how to create an ERPS instance 1 in the physical ring named "major-ring". Switch(config)#ethernet ring g8032 major-ring Switch(config-erps-ring)#port0 interface ethernet 1/0/1 Switch(config-erps-ring)#port1 none Switch(config-erps-ring)#instance 1 Switch(config-erps-ring-instance)# 33-8 level This command is used to configure the ring MEL value of an ERPS instance. Use the no form of this command to revert to the default setting. level MEL-VALUE no level Parameters MEL-VALUE Specifies the ring MEL value of the ERPS instance. The valid range is from 0 to 7. Default By default, this value is 1. Command Mode ERPS Instance Configuration Mode. Command Default Level Level: 12. Usage Guideline The configured ring MEL value of all ring nodes participating in the same ERPS instance should be the identical. Example This example shows how to configure the ring MEL value of ERPS instance 1 as 6. 358