D-Link DGS-3130 Emulator - Page 564

DGS-3130 Layer 3 Stackable Managed Switch CLI Reference Guide Command Mode Interface Configuration Mode. Command Default Level Level: 12. Usage Guideline The command is only available for VLAN interface configuration. Report suppression will suppress the duplicate MLD report or leave packets received in the suppression time. A small suppression time will cause the duplicate MLD packets be sent more frequently. Example This example shows how to configure the suppression time to be 125 on VLAN 1000. Switch# configure terminal Switch(config)# vlan 1000 Switch(config-vlan)# ipv6 mld snooping suppression-time 125 Switch(config-vlan)# 52-19 ipv6 mld snooping minimum-version This command is used to configure the minimum version of MLD that is allowed on the interface. Use the no form of this command to remove the restriction from the interface. ipv6 mld snooping minimum-version 2 no ipv6 mld snooping minimum-version Parameters None. Default No limit on minimum version. Command Mode Interface Configuration Mode. Command Default Level Level: 12. Usage Guideline The command is only available for VLAN interface configuration. This setting only applies to filtering of MLD membership reports. Example This example shows how to restrict all MLDv1 hosts to join. 560