D-Link DGS-3130 Emulator - Page 667

DGS-3130 Layer 3 Stackable Managed Switch CLI Reference Guide Switch# configure terminal Switch(config)# class-map match-all gold Switch(config-cmap)# match cos 6 Switch(config-cmap)# exit Switch(config)# class-map match-all silver Switch(config-cmap)# match cos 5 Switch(config-cmap)# exit Switch(config)# class-map match-all bronze Switch(config-cmap)# match cos 0 Switch(config-cmap)# exit Switch(config)# policy-map cust1-classes Switch(config-pmap)# class gold Switch(config-pmap-c)# police 800 2000 exceed-action set-dscp-transmit 0 Switch(config-pmap-c)# exit Switch(config-pmap)# class silver Switch(config-pmap-c)# police 2000 2000 exceed-action set-dscp-transmit 0 Switch(config-pmap-c)# exit Switch(config-pmap)# class bronze Switch(config-pmap-c)# police 8000 2000 exceed-action set-dscp-transmit 0 Switch(config-pmap-c)# exit Switch(config-pmap)# exit Switch(config)# interface ethernet 1/0/1 Switch(config-if)# service-policy input cust1-classes Switch(config-if)# exit Switch(config)# interface ethernet 1/0/2 Switch(config-if)# service-policy input cust1-classes Switch(config-if)# The cust2-classes policy map is configured and then attached to interface ethernet 1/0/1 for ingress traffic. Switch# configure terminal Switch(config)# policy-map cust2-classes Switch(config-pmap)# class gold Switch(config-pmap-c)# police 1600 2000 exceed-action set-dscp-transmit 0 Switch(config-pmap-c)# exit Switch(config-pmap)# class silver Switch(config-pmap-c)# police 4000 2000 exceed-action set-dscp-transmit 0 Switch(config-pmap-c)# exit Switch(config-pmap)# class bronze Switch(config-pmap-c)# police 16000 2000 exceed-action set-dscp-transmit 0 Switch(config-pmap-c)# exit Switch(config-pmap)# exit Switch(config)# interface ethernet 1/0/1 Switch(config-if)# service-policy input cust2-classes Switch(config-if)# 63-21 set This command is used to configure the new precedence field, DSCP field, and CoS field of the outgoing packet. The user can also specify the CoS queue for the packet. set {[ip] precedence PRECEDENCE | [ip] dscp DSCP | cos COS | cos-queue COS-QUEUE} no set {[ip] precedence PRECEDENCE | [ip] dscp DSCP | cos COS | cos-queue COS-QUEUE} 663