D-Link DGS-3130 Emulator - Page 260
ipv6 dhcp relay remote-id format
![]() |
View all D-Link DGS-3130 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 260 highlights
DGS-3130 Layer 3 Stackable Managed Switch CLI Reference Guide 24-2 ipv6 dhcp relay remote-id format This command is used to configure the sub-type of the remote ID. Use the no form of this command to revert to the default setting. ipv6 dhcp relay remote-id format {default | cid-with-user-define | user-define | expert-udf [standalone_unit_format {0 | 1}]} no ipv6 dhcp relay remote-id format Parameters default cid-with-user-define user-define Specifies to use the Switch's system MAC address as the remote ID. The remote ID is formed in the following format: | F01 | F02 | F03 | F04 | F05 | | Sub Type | VLAN ID | Module ID | Port ID | MAC | | | | | | Address | | 1 byte | 2 bytes | 1 byte | 1 byte | 6 bytes | F01. Sub Type: The number 1 indicates that this is the remote ID. F02. VLAN ID: The incoming VLAN ID of the DHCP client packet. F03. Module ID: For a standalone switch, the module ID is always 0. For a stacked switch, the module ID is the unit ID. F04. Port ID: The incoming port number of the DHCP client packet. The port number starts from 1. F05. MAC Address: The system MAC address of the Switch. Specifies to use a CID with user-defined string as the remote ID. The remote ID option is formed in the following format: | F01 | F02 | F03 | F04 | F05 | | Sub Type | VLAN ID | Module ID | Port ID | User | | | | | | Defined | | 1 byte | 2 bytes | 1 byte | 1 byte | Max. 256 | | | | | | bytes | F01. Sub Type: The number 2 indicates that this is the remote ID. F02. VLAN ID: The incoming VLAN ID of the DHCP client packet. F03. Module ID: For a standalone switch, the module ID is always 0. For a stacked switch, the module ID is the unit ID. F04. Port ID: The incoming port number of the DHCP client packet. The port number starts from 1. F05. User Defined: The user-defined string configured in the ipv6 dhcp relay remote-id udf command. By default, the field is empty. Specifies to use a user-defined string as the remote ID. The remote ID option is formed in the following format: | F01 | F02 | | Sub Type | User Defined | | 1 byte | Max. 256 bytes | 256
![](/manual_guide/products/dlink-dgs3130-emulator-9c3be7f/260.png)