D-Link DGS-3130 Emulator - Page 655
mls qos map dscp-mutation
View all D-Link DGS-3130 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 655 highlights
DGS-3130 Layer 3 Stackable Managed Switch CLI Reference Guide Command Mode Interface Configuration Mode. Command Default Level Level: 12. Usage Guideline The DSCP to CoS map is used by a DSCP trust port to map a DSCP value to an internal CoS value. In turn this CoS value is then mapped to the CoS queue based on the CoS to queue map configured by the priority-queue cos-map command. Example This example shows how to configure the DSCP to CoS map for mapping DSCP 12, 16, and 18 to CoS 1 for Ethernet 1/0/6. Switch# configure terminal Switch(config)# interface ethernet 1/0/6 Switch(config-if)# mls qos map dscp-cos 12,16,18 to 1 Switch(config-if)# 63-10 mls qos map dscp-mutation This command is used to define a named DSCP mutation map. Use the no form of this command to remove the mutation map. mls qos map dscp-mutation MAP-NAME INPUT-DSCP-LIST to OUTPUT-DSCP no mls qos map dscp-mutation MAP-NAME Parameters MAP-NAME INPUT-DSCP-LIST OUTPUT-DSCP Specifies the name of the DSCP mutation map in a string length up to 32 characters (no space is allowed). Specifies the list of DSCP code point to be mutated to another DSCP value. The range is from 0 to 63. A series of DSCPs can be separated by commas (,) or hyphens (-). No space or hyphen is before and after. Specifies the mutated DSCP value. The value is from 0 to 63. Default The output DSCP is equal to the input DSCP. Command Mode Global Configuration Mode. Command Default Level Level: 12. 651