D-Link DGS-3130 Emulator - Page 53
match ipv6 address
View all D-Link DGS-3130 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 53 highlights
DGS-3130 Layer 3 Stackable Managed Switch CLI Reference Guide Switch# configure terminal Switch(config)# vlan access-map vlan-map 20 Switch(config-access-map)# match ip address sp1 Switch(config-access-map)# end Switch# show vlan access-map VLAN access-map vlan-map 20 match ip address: sp1(ID: 1999) action: forward Switch# 4-12 match ipv6 address This command is used to associate IPv6 access lists for the configured sub-maps. Use the no form of this command to remove the matched entry. match ipv6 address {ACL-NAME} no match ipv6 address Parameters ACL-NAME Specifies the name of the IPv6 ACL access list to be configured. The name can be up to 32 characters. Default None. Command Mode VLAN Access-map Sub-map Configuration Mode. Command Default Level Level: 12. Usage Guideline Use this command to associate an IPv6 access list with the configured sub-map. One sub-map can only be associated with one access list (IP access list, IPv6 access list, or MAC access list). The IPv6 sub-map only checks IPv6 packets. Newer commands will overwrite the previous settings. Example This example shows how to set the match content in the sub-map. 49