D-Link DGS-3130 Emulator - Page 344
ethernet oam link-monitor error-frame-period
View all D-Link DGS-3130 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 344 highlights
DGS-3130 Layer 3 Stackable Managed Switch CLI Reference Guide Switch# configure terminal Switch(config)# interface ethernet 1/0/1 Switch(config-if)# ethernet oam link-monitor error-frame-seconds Switch(config-if)# This example shows how to disable notifying an Ethernet OAM error frame event on ethernet 1/0/1. Switch# configure terminal Switch(config)# interface ethernet 1/0/1 Switch(config-if)# no ethernet oam link-monitor error-frame-seconds Switch(config-if)# This example shows how to configure ethernet 1/0/1 Ethernet OAM error frame seconds monitor threshold to 100. Switch# configure terminal Switch(config)# interface ethernet 1/0/1 Switch(config-if)# ethernet oam link-monitor error-frame-seconds threshold 100 Switch(config-if)# This example shows how to configure ethernet 1/0/1 Ethernet OAM error frame seconds monitor window to 100 deciseconds. Switch# configure terminal Switch(config)# interface ethernet 1/0/1 Switch(config-if)# ethernet oam link-monitor error-frame-seconds window 100 Switch(config-if)# This example shows how to configure ethernet 1/0/1 Ethernet OAM error frame seconds monitor threshold to default value. Switch# configure terminal Switch(config)# interface ethernet 1/0/1 Switch(config-if)# no ethernet oam link-monitor error-frame-seconds threshold Switch(config-if)# 32-6 ethernet oam link-monitor error-frame-period This command is used to enable notifying the Ethernet OAM error frame period event and configure the monitor threshold and window on the specified port. Use the no form of this command to disable notifying the event or revert the parameters to the default value. ethernet oam link-monitor error-frame-period [threshold NUMBER | window NUMBER] no ethernet oam link-monitor error-frame-period [threshold | window] Parameters threshold NUMBER window NUMBER (Optional) Specifies the number of frame errors that must occur for this event to be triggered. The range is 0 to 4294967295. (Optional) Specifies the number of frames over which the threshold is defined. If threshold frame errors occur within the period, an event notification OAM PDU should be generated with an error frame period event TLV indicating that the threshold has been crossed in this window. The lower bound is the number of minimum frame-size frames that can be received in 100ms on the underlying physical layer. The upper bound is the number of minimum frame-size frames that can be received in one minute on the underlying physical layer. 340