D-Link DGS-3130 Emulator - Page 650

DGS-3130 Layer 3 Stackable Managed Switch CLI Reference Guide mls qos aggregate-policer NAME KBPS [BURST-NORMAL [BURST-MAX]] [conform-action ACTION] exceed-action ACTION [violate-action ACTION] [color-aware] mls qos aggregate-policer NAME cir CIR [bc CONFORM-BURST] pir PIR [be PEAK-BURST] [conformaction ACTION] [exceed-action ACTION [violate-action ACTION]] [color-aware] no mls qos aggregate-policer NAME Parameters NAME KBPS BURST-NORMAL BURST-MAX CIR PIR CONFORM-BURST PEAK-BURST confirm-action exceed-action violation-action ACTION color-aware Specifies the name of the aggregate policing rule. The NAME parameter can be up to 32 characters, is case sensitive. The policer names must start with an alphabetic character (not a digit) and must be unique across all aggregate policers. Specifies the average rate, in kilobits per second. (Optional) Specifies the normal burst size in kilobytes. (Optional) Specifies the maximum burst size, in kilobytes. Specifies the committed information rate in Kbps. The committed packet rate is the first token bucket for the two-rate metering. Specifies the peak information rate in Kbps. The peak information rate is the second token bucket for the two-rate metering. (Optional) Specifies the burst size for the first token bucket in kilobytes. (Optional) Specifies the burst size for the second token bucket in kilobytes. (Optional) Specifies the action to take on green color packets. If not specified, the default action is transmit. Specifies the action to take on packets that exceed the rate limit. For two rate policer, if not specified, the default action is drop. (Optional) Specifies the action to take on packets that violate the normal and maximum burst sizes for singe rate policing. Specifies the action to take for those packets that did not conform to both CIR and PIR. For a single rate policer, If violation-action is not specified, it will create a single rate two color policer. For a two rate policer, if not specified, the default action is the same as exceed-action. Specifies the action to take on packets. Specify one of the following keywords: drop - Drops the packet. set-dscp-transmit VALUE - Sets the IP DSCP value and transmits the packet with the new IP DSCP value. set-1p-transmit - Sets the 802.1p value and transmits the packet with the new value. transmit - Transmits the packet unaltered. (Optional) Specifies the option for the single rate three colors policer or two rates three colors policer. When color-aware is not specified, the policer works in the color blind mode. When color-aware is specified, the policer works in color aware mode. Default None. Command Mode Global Configuration Mode. Command Default Level Level: 12. 646