D-Link DGS-3130 Emulator - Page 66
DGS-3130 Layer 3 Stackable Managed Switch CLI Reference Guide, MAP-NAME
![]() |
View all D-Link DGS-3130 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 66 highlights
DGS-3130 Layer 3 Stackable Managed Switch CLI Reference Guide 4-20 show vlan access-map This command is used to display the VLAN access-map configuration information. show vlan access-map [MAP-NAME] Parameters MAP-NAME (Optional) Specifies the name of the VLAN access map being configured. The name can be up to 32 characters. Default None. Command Mode User/Privileged EXEC Mode. Any Configuration Mode. Command Default Level Level: 1. Usage Guideline If no access-map name is specified, all VLAN access-map information will be displayed. If the user enables the ACL hardware counter for an access-map, the counter will be displayed based on each sub-map. Example This example shows how to display the VLAN access-map. Switch# show vlan access-map VLAN access-map vlan-map 10 match ip access list: stp_ip1(ID: 1888) action: forward VLAN access-map vlan-map 20 match mac access list: ext_mac(ID: 6995) action: redirect eth1/0/5 Switch# This example shows how to display the contents of the VLAN access-map if its hardware counter is enabled. 62
![](/manual_guide/products/dlink-dgs3130-emulator-9c3be7f/66.png)