D-Link DGS-3130 Emulator - Page 640

DGS-3130 Layer 3 Stackable Managed Switch CLI Reference Guide dip Specifies that the load-balancing algorithm will include the destination IP address. port Specifies that the load-balancing algorithm will include the TCP or UDP port. Default By default, sip is used. Command Mode Global Configuration Mode. Command Default Level Level: 12. Usage Guideline This command is used to configure the hash load balancing algorithm to determine the next hop entry from the different paths to be destined for the same destination. Example This example shows how to configure the load-balance algorithm to be dip. Switch#configure terminal Switch(config)#ip route ecmp load-balance dip Switch(config)# 62-9 show ip protocols This command is used to display the state of the routing process. show ip protocols [rip] Parameters rip (Optional) Specifies to display the RIP protocol overall configuration. Default None. Command Mode User/Privileged EXEC Mode. Any Configuration Mode. Command Default Level Level: 1. 636