Home » D-Link Manuals » Wireless » D-Link DGS-3130 » Manual Viewer

D-Link DGS-3130 Emulator - Page 463

ping access-class

Get D-Link DGS-3130 PDF manuals and user guides

View all D-Link DGS-3130 manuals

Add to My Manuals
Save this manual to your list of manuals

Page 463 highlights

DGS-3130 Layer 3 Stackable Managed Switch CLI Reference Guide Usage Guideline Use this command to verify the reachability, reliability, and delay of the path to the destination host. Be sure to set the count or timeout value. Example This example shows how to ping the host with IP address 172.50.71.123. Switch#ping 172.50.71.123 count 5 Reply from 172.50.71.123, time

Match case Limit results 1 per page

DGS-3130 Layer 3 Stackable Managed Switch CLI Reference Guide

459

Usage Guideline

Use this command to verify the reachability, reliability, and delay of the path to the destination host. Be sure to set

the

count

or

timeout

value.

Example

This example shows how to ping the host with IP address 172.50.71.123.

Switch#ping 172.50.71.123 count 5

Reply from 172.50.71.123, time<10ms

Reply from 172.50.71.123, time<10ms

Reply from 172.50.71.123, time<10ms

Reply from 172.50.71.123, time<10ms

Reply from 172.50.71.123, time<10ms

Ping Statistics for 172.50.71.123

Packets: Sent =5, Received =5, Lost =0

Switch#

This example shows how to ping the host with IPv6 address 2001:238:f8a:77:7c10:41c0:6ddd:ecab.

Switch#ping 2001:238:f8a:77:7c10:41c0:6ddd:ecab count 3

Reply from 2001:238:f8a:77:7c10:41c0:6ddd:ecab, bytes=100, time<10 ms

Reply from 2001:238:f8a:77:7c10:41c0:6ddd:ecab, bytes=100, time<10 ms

Reply from 2001:238:f8a:77:7c10:41c0:6ddd:ecab, bytes=100, time<10 ms

Ping Statistics for 2001:238:f8a:77:7c10:41c0:6ddd:ecab

Packets: Sent =3, Received =3, Lost =0

Switch#

41-2

ping access-class

This command is used to specify an access list to restrict the access via ping. Use the

no

form of this command to

remove the access list check.

ping access-class

IP-ACL

no ping access-class

Parameters

IP-ACL

Specifies a standard IP access list. The source address field of the permit or

deny entry defines the valid or invalid host.

Default

None.

Command Mode

Global Configuration Mode.