D-Link DGS-3130 Emulator - Page 290

DGS-3130 Layer 3 Stackable Managed Switch CLI Reference Guide Usage Guideline Use this command to globally enable the IPv6 DHCP server and relay service on the Switch. The configuration changes of the DHCPv6 server cannot take effect in real-time, disable and enable the DHCPv6 server to make the new configuration take effect. Example This example shows how to enable the IPv6 DHCP server and relay service. Switch# configure terminal Switch(config)# service ipv6 dhcp Switch(config)# 25-13 show ipv6 dhcp This command is used to display the DHCPv6 related setting for interfaces. show ipv6 dhcp [interface [INTERFACE-ID]] Parameters INTERFACE-ID (Optional) Specifies the VLAN interface to display the DHCPv6 related setting. Default None. Command Mode User/Privileged EXEC Mode. Any Configuration Mode. Command Default Level Level: 1. Usage Guideline Use this command to display the device's DHCPv6 DUID or use the show ipv6 dhcp interface command to display the DHCPv6 related settings for interfaces. If the interface ID is not specified, all interfaces that are enabled with the DHCPv6 function will be displayed. Example This example shows how to display the DHCPv6 information for interface VLAN 1, when VLAN 1 is not in the DHCPv6 mode. Switch# show ipv6 dhcp interface vlan 1 vlan 1 is not in DHCPv6 mode Switch# This example shows how to display the DHCPv6 client for interface VLAN 1, when VLAN 1 is DHCPv6 server enabled. 286