D-Link DGS-3130 Emulator - Page 773

DGS-3130 Layer 3 Stackable Managed Switch CLI Reference Guide Command Default Level Level: 15. Usage Guideline Use this command to specify the interface whose IP address will be used as the source address for sending the SNMP trap packet. Example This example shows how to configure VLAN 100 as the sourcing interface for sending SNMP trap packets. Switch# configure terminal Switch(config)# snmp-server source-interface traps vlan 100 Switch(config)# 76-8 snmp-server user This command is used to create an SNMP user. Use the no form of this command to remove an SNMP user. snmp-server user USER-NAME GROUP-NAME {v1| v2c | v3 [encrypted] [auth {md5 | sha} AUTHPASSWORD [priv {des PRIV-PASSWORD | aes PRIV-PASSWORD}]]} [access IP-ACL-NAME] no snmp-server user USER-NAME GROUP-NAME {v1| v2c | v3} Parameters USER-NAME GROUP-NAME v1 v2c v3 encrypted auth md5 sha AUTH-PASSWORD priv des aes PRIV-PASSWORD access IP-ACL-NAME Specifies a username of a maximum of 32 characters. The syntax is general string that does not allow spaces. Specifies the name of the group to which the user belongs. The syntax is general string that does not allow spaces. Specifies that the user uses the SNMPv1 security mode. Specifies that the user uses the SNMPv2c security mode. Specifies that the user uses the SNMPv3 security mode. (Optional) Specifies that the following password is in encrypted format. (Optional) Specifies the authentication level. (Optional) Specifies to use HMAC-MD5-96 authentication. (Optional) Specifies to use HMAC-SHA-96 authentication. (Optional) Specifies the authentication password in the plain-text form. This password is 8 to 16 octets for MD5 and 8 to 20 octets for SHA. If the encrypted parameter is specified, the length is 32 for MD5 and 40 for SHA. The format is a hexadecimal value. (Optional) Specifies the type of encryption. (Optional) Specifies to use DES algorithm for encryption. (Optional) Specifies to use AES algorithm for encryption. Specifies the private password in the plain-text form. This password can be up to 64 characters. If the encrypted parameter is specified, the length is fixed to 16 octets (Optional) Specifies the standard IP ACL to associate with the user. 769