D-Link DGS-3130 Emulator - Page 428
show interfaces description
View all D-Link DGS-3130 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 428 highlights
DGS-3130 Layer 3 Stackable Managed Switch CLI Reference Guide show interfaces [INTERFACE-ID [, | -]] auto-negotiation Parameters INTERFACE-ID , auto-negotiation (Optional) Specifies the interface ID. If no interface is specified, the autonegotiation information on all physical port interfaces will be displayed. (Optional) Specifies a series of interfaces or separates a range of interfaces from a previous range. No space is allowed before or after the comma. (Optional) Specifies a range of interfaces. No space is allowed before or after the hyphen. Specifies to display detailed auto-negotiation information. Default None. Command Mode User/Privileged EXEC Mode. Any Configuration Mode. Command Default Level Level: 1. Usage Guideline This command displays the auto-negotiation information. Example This example shows how to display auto-negotiation information. Switch#show interfaces ethernet 1/0/1 auto-negotiation eth1/0/1 Auto Negotiation: Enabled Speed auto downgrade: Disabled Remote Signaling: Not detected Configure Status: Complete Capability Bits: 10M_Full, 100M_Full, 1000M_Full Capability Advertised Bits: 10M_Full, 100M_Full, 1000M_Full Capability Received Bits: 10M_Full, 100M_Full RemoteFaultAdvertised: Disabled RemoteFaultReceived: NoError Switch# 38-12 show interfaces description This command is used to display the description and link status of interfaces. 424