D-Link DGS-3130 Emulator - Page 644

Default None. DGS-3130 Layer 3 Stackable Managed Switch CLI Reference Guide Command Mode User/Privileged EXEC Mode. Any Configuration Mode. Command Default Level Level: 1. Usage Guideline The routing table gathers routes learned from different protocols. If multiple routes can reach the same network, the one with the best distance and the next hop is reachable will be chosen as the best and set to hardware for routing of packets. They are the route entry currently at work. That is, if the route with the best distance is with the unreachable next hop, then the route with the next preferred distance will be chosen. Example This example shows how to display the routing entries for IPv6. Switch#show ipv6 route IPv6 Routing Table Code: C - connected, S - static, R - RIP, B - BGP, I - IS-IS, O - OSPF, IA - OSPF inter area E1 - OSPF external type 1, E2 - OSPF external type 2 SLAAC - Stateless address autoconfiguration S 1234::/64 [1/1] via FE80::206:28FF:FED8:FEAC, vlan 11 R 2000:17::/64 [71/2] via FE80::206:28FF:FED8:FEAC, vlan 11 R 2000:18::/64 [71/2] via FE80::206:28FF:FED8:FEAC, vlan 11 C 2001:DB8:0:5::/64 [0/1] is directly connected, vlan 11 O 2001:DB8:0:5::1/128 [110/10] via FE80::206:28FF:FED8:FE94, vlan 11 R 2001:DB8:0:3600::/64 [71/2] via FE80::206:28FF:FED8:FEAC, vlan 11 R 2001:DB8:0:3620::/64 [71/2] via FE80::206:28FF:FED8:FE94, vlan 11 R 2016:3130::/64 [71/2] via FE80::206:28FF:FED8:FEAC, vlan 11 I 2016:3130:A::/64 [116/10] via FE80::206:28FF:FED8:FEAC, vlan 11 I 2016:3130:B::/64 [116/10] via FE80::206:28FF:FED8:FEAC, vlan 11 O 2105:5000:A::/64 [110/430] via FE80::206:28FF:FED8:FE94, vlan 11 C 2107:100:A::/64 [0/1] is directly connected, vlan 1 O 2207:7000:AC::/64 [110/8030] via FE80::206:28FF:FED8:FE94, vlan 11 O 2207:7171:ABCD::/64 [110/8040] via FE80::206:28FF:FED8:FE94, vlan 11 R 6000::/64 [71/2] via FE80::206:28FF:FED8:FEAC, vlan 11 R 7100::/64 [71/2] via FE80::206:28FF:FED8:FEAC, vlan 11 Total Entries: 16 entries, 16 routes Switch# 62-13 show ipv6 route summary This command is used to display the current state of the IPv6 routing table. 640